Philips LX7000SA - Manual (Page 9)

7
English
1 STANDBY ON / ECO POWER y
– press to switch the system on or to standby mode.
– hold down to switch the system to Eco Power
standby mode.
2 S SEARCH / PREV
SEARCH / NEXT
T
– in Disc mode, press to skip to the previous/next
chapter/track.
– in Disc mode, hold down to fast reverse/forward the
disc or skip to previous/next MP3 album.
– in Tuner mode, to tune to a lower or higher radio
frequency.
– in Clock mode, to set the hours and minutes.
– in TV/AV mode, to change Philips TV’s channel (on the
remote control only).
3 Ç STOP / CLEAR
– in Disc mode, to stop playback or to clear a
programme.
– in Tuner mode, to stop programming or erase a preset
radio station (on the system only).
– in Clock mode, to exit clock setting or cancel a timer
(on the system only).
– in Plug and Play mode, to exit the operation.
4 ÉÅ PLAY / PAUSE
– to star t or interrupt disc playback.
– to star t Plug and Play installation (on the system
only).
5 Disc Tray
6 PROG
– in Disc mode, to programme CD tracks or switch the
VCD/DVD FTS (favourite track selection) on/off.
– in Tuner mode, to programme preset radio stations.
– in Clock mode, to select 12- or 24-hour clock mode.
Functional Overview
Top and Front panels
SOUND
VOLUME
SURROUND
SOURCE OPEN/CLOSE
iR SENSOR
STANDBY-ON
ECO POWER
DVD VIDEO /SACD DIGITAL SURROUND SYSTEM
1 2 3 4 2 6 7 8 9 5 0 ! @ % $ #
PROG STOP/ CLEAR SEARCH / PREV PLAY/ PAUSE CLOCK / TIMER SEARCH / NEXT
F
UNCTIONAL
O
VERVIEW
7 CLOCK / TIMER
– press to view or set the clock.
– hold down to set the timer.
8 OPEN/CLOSE
– to open or close the disc tray.
9 SOURCE
– to select the desired source or external input source
(TV/AV, DISC, TUNER, AUX or DI [Digital In]).
0 Display screen
– displays current status of the system.
! SURROUND
– to select multichannel surround (Dolby Digital, DTS
or Dolby Surround), 3D sound or stereo sound.
@ SOUND
– to select various sound effects : CONCERT, DRAMA,
ACTION, SCI-FI, CLASSIC, JAZZ, ROCK or DIGITAL.
# iR sensor
– receives signals from the remote control.
$ VOLUME
– to adjust the master volume.
% n
– to connect headphones.
The same functions can be accessed via the same
buttons on the remote control (see next page)