Only for u. k, Electrical plug information – Panasonic EY7410 User Manual

Page 13

Advertising
background image

- 1 -

ONLY FOR U. K.

VI

.

ELECTRICAL PLUG

INFORMATION

FOR YOUR SAFETY PLEASE READ

THE FOLLOWING TEXT CAREFULLY

This appliance is supplied with a moulded

three pin mains plug for your safety and

convenience.

A 3 amp fuse is fitted in this plug.

Should the fuse need to be replaced please

ensure that the replacement fuse has a

rating of  amp and that it is approved by

ASTA or BSI to BS16.

Check for the ASTA mark or the BSI

mark on the body of the fuse.

If the plug contains a removable fuse cover

you must ensure that it is refitted when the

fuse is replaced.

If you lose the fuse cover the plug must

not be used until a replacement cover is

obtained.

A r e p l a c e m e n t f u s e c o v e r c a n b e

purchased from your local Panasonic

Dealer.

IF THE FITTED MOULDED PLUG IS

UNSUITABLE FOR THE SOCKET OUTLET

IN YOUR HOME THEN THE FUSE

SHOULD BE REMOVED AND THE PLUG

CUT OFF AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE

ELECTRICAL SHOCK IF THE CUT OFF

PLUG IS INSERTED INTO ANY 1 AMP

SOCKET.

If a new plug is to be fitted please observe

the wiring code as shown below.

If in any doubt please consult a qualified

electrician.

IMPORTANT:

The wires in this mains lead are

coloured in accordance with the

following code:

Blue: Neutral

Brown: Live

As the colours of the wire in the mains

lead of this appliance may not correspond

with the coloured markings identifying the

terminals in your plug, proceed as follows.

The wire which is coloured BLUE must be

connected to the terminal in the plug which

is marked with the letter N or coloured

BLACK.

The wire which is coloured BROWN must

be connected to the terminal in the plug

which is marked with the letter L or coloured

RED.

Under no circumstances should either

of these wires be connected to the earth

terminal of the three pin plug, marked with

the letter E or the Earth Symbol .

How to replace the fuse: Open the fuse

compartment with a screwdriver and

replace the fuse and fuse cover if it is

removable.

Fuse Cover

This apparatus was produced to BS800.

EY7410(EU).indb 13

2006/07/19 17:27:54

Advertising