Philips AJ7010 - Manual (Page 17)

1
Press NATURE SOUND.
2
Rotate the knob to select a nature sound.
3
Press the knob to confirm.
4
Rotate the knob to adjust the volume level of the nature sound
(0-8).
Tip
•
To deactivate the nature sound, press the knob again.
Set alarm timer
Set alarm
You can set two alarms to ring at different time.
Note
•
Make sure that the clock is set correctly.
1
In standby mode, press and hold AL1/AL2 for two seconds to
activate alarm setting mode.
» The hour digits and [AL1]/[AL2] begin to blink.
2
Rotate the main knob to adjust hour.
3
Press the main knob to confirm.
» The minute digits and [AL1]/[AL2] begin to blink.
4
Repeat Step 2-3 to set minute.