Precor Electronic Console with the Pulse Feature 903 - Manual (Page 13)

page 13
2. Remove the paper backing from one side of the thick pad
and press the pad firmly in place between the roller guard
and the deck of the treadmill. See Diagram 10.
3. Make a copy of the template shown in Diagram A. See
Appendix A. Cut along the dotted lines. Carefully cut away
the shaft section and the magnet mounting pad island.
4. Lay the template against the right flywheel. Use a pencil to
mark the outline for the magnet mounting pad. Remove the
template.
Diagram 10
Thick mounting pad