Precor Electronic Console with the Pulse Feature 903 - Manual (Page 4)

page 4
Before You Begin
Thank you for purchasing the easy-to-use electronic
console option for your Precor 903 Manual or 904 Total Body
Treadmill. Before assembling the console onto your
treadmill, take the time to read through this manual so that
you are familiar with the contents of the package and the
features on the electronic console.
Obtain the appropriate tools before assembling the electronic
console onto the 903 or 904 treadmill. You will need a Phillips
head screwdriver to attach the electronic console onto the
handrail clamp.
Unpacking the Electronic Console
Carefully unpack the electronic console and its components.
Make sure that you have the following items:
❑ one electronic console
❑ one mounting bracket with four (two short and two
long) Phillips head screws
❑ one reed switch and wire
❑ one magnet
❑ one ear clip and wire connector
❑ three C clips—holds reed switch wire to handrail
❑ two mounting pads (one thick and one thin pad)
If any items are missing, contact the dealer from whom you
purchased the treadmill or call 1-800-4-PRECOR for the dealer
nearest you.