Parker Products OEM650X - Manual (Page 28)

21
OEM650/OEM650X • INSTALLATION
Standby Current JU9 JU10
Full Current* on on
75% Current off on
50% Current on off
25% Current off off
* Default Setting
Table 2-12. Auto Standby Jumper Settings
Jumper #11: Auto Test
The Automatic Test function turns the motor shaft slightly less than
six revolutions in Alternating mode at 1 rps. The Automatic Standby
function and motor resolution settings are disabled when you use
the Automatic Test function.
Auto Test JU11
Enabled off
Disabled* on
* Default Setting
Table 2-13. Auto Test Jumper Settings