Placing a multi-point call with the viewstation mp – Polycom Viewstation MP User Manual
Page 110
ViewStation 512/MP
110
ViewStation User’s Guide
Placing a Multi-Point Call with the ViewStation MP
To place a multi-point video call, follow these steps:
1.
From the main calling screen, highlight the Video Call icon and press the
SELECT button.
2.
Enter the number of the first party in your call in the Video Phone screen
and change the speed of your call if necessary. All multi-point calls must be
connected at the same speed. Then press the CALL•HANG-UP button on
the remote to place the call. The number of call progress indicators
indicates the number of ISDN channels that are used in this call.
Use the following table as a guide for multi-point call speeds.
Number of
ISDN Lines
Total Number of
Sites in Call*
Speed of Calls
(kbps)
1
2
3
128
64
2
2
3
256
128
3
2
3
4
384
192
128
4
2
3
4
512
256
128
* Includes the site that initiates the call.