Polycom Viewstation MP - Manual (Page 28)

Placing and Answering Calls
28 ViewStation User’s Guide
7. To end your call, press the CALL•HANG-UP button on the remote.
Highlight the Disconnect Video Call icon and press the SELECT button on
the remote.
8. If the call was made with a number that is not in your address book, a dialog
box will give you the opportunity to add the number. If you select Yes, the
system will take you to the address book where you can enter the
information. If you select No, the main calling screen will appear on your
monitor.
You can set a maximum limit on the time users spend in a call, which enables
you to have more control over the use of your ISDN lines. To set a limit (in
minutes), change the Maximum Time in Call on the System
Info
➢Setup➢General Setup screen. See the System Information section for
details.
NOTE: If you stay in this screen for 60 seconds, but you do not
press the SELECT button, the call will be disconnected.