Polycom Viewstation MP - Manual (Page 116)

ViewStation 512/MP
116 ViewStation User’s Guide
Follow these steps to switch multi-point meeting modes:
1. From the main calling screen, highlight the System Info icon and press the
SELECT button on the remote. If you are switching modes during a
multi-point call, press the MENU button to go to the main calling screen.
2. Go to Setup & Diagnostics ➢Setup➢Network and press the SELECT
button on the remote for the Network screen.
3. Use the arrow buttons to highlight the Multi-Point Setup icon and press the
SELECT button.
4. Select Discussion, Presentation or Automatic mode.
5. Press the MENU button on the remote to return to the previous menu or
press the CALL•HANG-UP button to return to the main calling screen.