Ch 4 connecting to the network, Connecting to the network -1, Connecting to the network – Panasonic DP-C106 User Manual
Page 116
4–1
Connecting to the Network
This chapter discusses the basic stages of connecting the printer to the
network, provides an overview of network requirements and protocol
diagrams, and describes how to physically connect the printer to an
established network.
Network installation is generally performed by a network or printing
administrator and involves four stages:
•
Physical connection of the printer to the network and to the server.
If this step includes preparation of a network node and routing of
the printer network cable, refer to the network documentation for
specific installation instructions.
•
Configuring UNIX, Windows NT 4.0 and IPX (Novell)
network
servers to provide client access to the DP-C106 as a color
PostScript or PCL printer. No special configuration of AppleShare
servers is required. Refer to
•
Setting up the printer for the network environment. At the Printer
Control Panel, configure the Server Setup, Network Setup, and
Printer Setup. You can then configure the remaining setup
options from the Printer Control Panel or remote workstation with
WebSetup. You can also calibrate the DP-C106. Refer to
Performing the Setup from the Printer Control Panel
and
Using
ColorWise Pro Tools
.
4