Switching the power off, Switching the power off -66 – Panasonic DP-C106 User Manual
Page 87
Advertising
Setting Up the DP-C106
Printing the Test Page
1-66
Switching the Power Off
1. Ensure
that
the
READY message is displayed on the two Control Panels.
Do not switch Off the power if any other message is displayed. There may
be a problem, or if the DP-C106 is networked, it may be receiving data.
2.
Press the Power Switch to the Off (O) position on the Scanner only.
The Scanner controls the power for the Printer, therefore it is not necessary
to switch Off the power on the Printer.
Advertising