Pioneer Multi Projection System RM-V1000NU - Manual (Page 27)

26
INSTALLATION AND ASSEMBLY
(3) Carrying the Units After Opening Packaging
1 Screen
To carry the screen unit after opening the packaging, hold them by the parts shown in the figure, and lift and
move them.
(Lifted by one or two persons)
Hold the parts indicated by
(Fig. 3-5)
¶ Never drag the system along the floor when moving the units.
¶ The lenticular sheet damages very easily as it is very thin. Therefore move it gently and do not apply excessive
shock or vibration to it.
¶ As the panels supporting the screen are very thin and deform easily, be careful that they do not hit or get
hooked onto surrounding objects when moving them.
2 Unit
¶ When moving the unit, push the frame (square) without pushing the rear panel. Never push to the front or
back.
¶ Do not move the system on casters on rough places such as tiles and bricks.
¶ Do not move the system after installation.
123456789012
123456789012
123456789012
123456789012
123456789012
Hold the shaded parts.