Making the connections – Panasonic SCAKX14 User Manual
Page 8
7
Making the connections
Conserving power
The system consumes approximately 0.2 W when it is in
standby mode. Disconnect the power supply if you do not
use the system.
Some settings will be lost after you disconnect the system.
You have to set them again.
1
Connect the speakers.
Be careful not to cross (short-
circuit) or reverse the polarity
of the speaker wires as doing
so may damage the speakers.
2
Connect the AM loop antenna.
Stand the antenna up on its base until it clicks.
3
Connect the FM indoor antenna.
Place the antenna where reception is best.
4
Connect the AC power supply cord.
Use the supplied AC power supply cord with this system
only.
Do not use an AC power supply cord from other
equipment.
3
4
2
1
To household AC outlet
B
A
(4
)
(4
)
Black
Red
Tape
AKX14P.En.book Page 7 Tuesday, January 31, 2012 2:46 PM