Printronix H-SERIES P7000 - Manual (Page 86)

86
Chapter 4 NETWORK SETUP MENU
Ant. Diversity
The type of antenna used:
• Diverse (default). Select when you want to use the antenna with the best
reception.
• Primary. Select when you want to use the Primary antenna on the server.
• Auxiliary. Select when you want to use the Auxiliary antenna on the
server.
Preamble
The length of the preamble in transmit packets.
• Default. The Wireless option automatically determines the length.
• Short. For newer printers which can handle higher transer rate speeds.
• Long. For older printers which cannot handle higher transfer rate speeds.
Power Mgmt
This allows you to set power-save mode and sleep time. A value specifying
the sleep time in milliseconds will be provided. If set to zero, power-save
mode will be disabled. The range includes:
• 0 ms. (default)
• 100 ms. - 1000 ms.
Transmit Power
The power level as a percentage of full power (0 - 100%).
Internat. Mode
When enabled, the Wireless option adapts to international frequency
requirements in Europe. The options include:
• Disable (default)
• Enable
Auth Method
This feature allows the user to select the authentication method used for the
wireless network interface.
• Open (the default). Selects open authentication.
• Shared. Selects shared key authentication.
• Kerberos. Selects Kerberos authentication (for use when a Symbol RF
card is installed).
• LEAP. Selects LEAP authentication (for use with a Cisco RF card
installed).