Printronix H-SERIES P7000 User Manual
Page 97
Hangul LP+ Emulation
97
Page Format
Reset Cmd CFG Ld
When the printer receives a host data stream reset command (ESC @ or
ESC[K) in addition to resetting printer variables, the power-up configuration
will be loaded.
•
Disable (the default). The factory configuration is loaded when the reset
command is executed.
•
Power-Up Config. The power-up configuration is loaded when the reset
command is executed.
•
Current Config. The currently selected configuration is loaded when the
reset command is executed.
•
Factory Config. The factory installed configuration is loaded when the
reset command is executed.
Error Handling
This command determines the way illegal DBCS characters are processed:
•
Normal (the default). Will ignore illegal DBCS characters.
•
As Space. Will insert two space characters (0X20, 0X20) when the data
stream contains error DBCS coding.
•
As Square. Will insert a black square (0xAIBD) when the data stream
contains error DBCS coding. This is applicable for the Hanzi Big5 build
only.