Pioneer VSX-41 - Manual (Page 32)

Playing sources 05
32
En
Choosing the input signal
You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
LEARN ERASE SEARCH BY BRAND
RECEIVER SOURCE
ENTER
ENTER
MPX/RETURN DTV INFO
DTV ON/OFF DTV MENU
D.ACCESS T.EDIT/GUIDE
ST
TUNE
T P SE U
TUNE
ST
CLASS
FL DIMMER
BAND
TOP MENU AUDIO SUB TITLE
REMOTE SETUP
RECEIVER CONTROL
STANDARD ADV.SURR. STEREO
ANGLE
1 ¡ 4 ¢
7 8 3 ¶
LEVEL
DVD VCR CD-R TV
RCV TUN TVC CD
TEST TONE
CH SELECT
INPUT ATT
INPUT SEL. MUTE MIDNIGHT/
LOUDNESS SIGNAL SEL
MULTI CONTROL
EFFECT DISPLAY
DISC
+10
1 2 3
4 5 6
7 8 9
0
• Press SIGNAL SEL (SIGNAL SELECT) to
select the input signal corresponding to the
source component.
Each press switches between AUTO, DVD
7.1ch, ANALOG and DIGITAL. The default is
AUTO.
DVD 7.1ch will only appear when DVD/LD is
selected using the remote or the
MULTI JOG/
INPUT SELECTOR dial on the front panel.
When set to DIGITAL, 2 DIGITAL lights when
a Dolby Digital signal is input, and DTS lights
when a DTS signal is input.
• This receiver can only play back
Dolby Digital, PCM (32kHz, 44kHz, 48kHz,
and 96 kHz) and DTS digital signal
formats. With other digital signal formats,
set to
ANALOG.
• You may get digital noise when a LD
or CD player compatible with DTS is
playing an analog signal. To prevent noise,
make the proper digital connections (page
14) and set the signal input to
DIGITAL.
• Some DVD players don’t output DTS
signals. For more details, refer to the
instruction manual supplied with your DVD
player.
Listening to multichannel
playback
LEARN ERASE SEARCH BY BRAND
RECEIVER SOURCE
ENTER
ENTER
MPX/RETURN DTV INFO
DTV ON/OFF DTV MENU
D.ACCESS T.EDIT/GUIDE
ST
TUNE
T P SE U
TUNE
ST
CLASS
FL DIMMER
BAND
TOP MENU AUDIO SUB TITLE
REMOTE SETUP
RECEIVER CONTROL
STANDARD ADV.SURR. STEREO
ANGLE
1 ¡ 4 ¢
7 8 3 ¶
LEVEL
DVD VCR CD-R TV
RCV TUN TVC CD
TEST TONE
CH SELECT
INPUT ATT
INPUT SEL. MUTE MIDNIGHT/
LOUDNESS SIGNAL SEL
MULTI CONTROL
EFFECT DISPLAY
DISC
+10
1 2 3
4 5 6
7 8 9
0
1 Switch on the playback component.
2 Select the source you want to playback.
Use the MULTI CONTROL buttons on the
remote (or MULTI JOG/INPUT SELECTOR dial
on the front panel).
3 Press STANDARD.
If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding format
will automatically be selected and shows in the
display.