Panasonic KX-FP121AL - Manual (Page 137)

137
Features Summary
General
Information
Checking the amount of remaining film
FILM REMAIN
122
Setting the dialling mode
DIALING MODE
#13
Basic features
Code Feature & Display Available settings Meaning Page
#01
Setting the date and time
SET DATE & TIME
(2 digits for each entry) mm/dd/yy hh:mm 29
#02
Setting your logo
YOUR LOGO
(Up to 30 characters) 30
#03
Setting your facsimile telephone number
YOUR FAX NO.
(Up to 20 digits) 32
#10
Setting the caller’s recording time
RECORDING TIME
110
#04
Printing the sending report
SENDING REPORT
ERROR
ON
OFF
If transmission fails
Activate
Deactivate
55
TONE
PULSE
Sets to TONE.
Sets to PULSE.
37
#18
Note:
● You can display basic features in the order above by rotating instead of entering the code
number (#01, #02, etc.).
EASY DIAL
(The pre-selected setting is in bold.)
VOX
1 MIN
Unlimited
1 minute
#11
Setting the remote operation ID
REMOTE TAD ID
ID=111
Any 3-digit number except a
number using digits 0 or 7
102
#06
Setting the ring count in the TAD/FAX
mode
TAD RING COUNT
2, 3, 4, 5, 6, 7, 8, 9
TOLL SAVER
RINGER OFF
2 to 9 rings
Saves you the charges for
the call.
Does not ring.
109
Setting the ring count in the FAX ONLY
mode
FAX RING COUNT
2, 3, 4, 5, 6, 7, 8, 9 2 to 9 rings 74
■ For KX-FP121/KX-FM131
Code Feature & Display Available settings Meaning
Setting the PC link
PC LINK
ON
OFF
Activate
Deactivate
#14
The following feature is for KX-FM131 only.
See PANA LINK Software Guide for detail.