Panasonic KX-FP121AL - Manual (Page 86)

86
Receiving Faxes
This feature allows your unit to call your pager when your unit receives a fax document.
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select “ON”.
● If this feature is not required, select “OFF”.
5 Press .
6 Enter your pager number.
● You can enter a total of 46 digits and/or pauses.
Example:
1 202 555 1234PPP12345678PPP5555#
Your pager
number
Pauses
Your pager access
code, if required.
Message you want displayed
on your pager when your unit
receives a fax.
NO.=
START/SET/COPY
MODE=ON ▼▲
MODE=OFF ▼▲
START/SET/COPY
FAX PAGER CALL
7 0
1.SYSTEM SET UP
MENU
How your unit and pager work
When your unit receives
a fax document, it will call
your pager company. Your pager
company will
call your pager.
Pager
company
Pager
5 5 5 5
A few minutes later, your pager will display the same
message you entered in step 6 above.
(For example: 5555)
If you have subscribed to a Caller IDservice and the
Caller ID information (telephone number) is received,
your pager will display the telephone number.
7 Press .
● The unit will dial the stored pager number.
8 Check that your pager receives a pager
test call.
9 Press .
If the AUTO ANSWER light is off, turn it
on by pressing
. AUTO ANSWER
MONITOR
PAGER TEST
START/SET/COPY
1 2 3
4 5 6
7 8 9
0
START/SET/COPY
MENU
REDIAL/PAUSE
(Pause)
/
ON
AUTO ANSWER
FAX ON
MONITOR
10
Pager call
■
For KX-FP101