Panasonic KX-FP121AL - Manual (Page 73)

73
Receiving Faxes
Fax/Copy
Changing the AUTO ANSWER setting to the FAX ONLY mode
Note:
● This mode should not be used with a
telephone line which is used for both voice
and fax calls. When the unit answers the
call, fax communication is attempted with the
other fax machine even if someone is trying
to call you.
● The number of rings before a call is
answered can be changed (p. 74).
● To change to the TAD/FAX or TEL/FAX mode,
select “TAD/FAX” or “TEL/FAX” in step 4.
1 2 3
4 5 6
7 8 9
0
/
START/SET/COPY
MENU
ON
AUTO ANSWER
TAD/FAX ON
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select “FAX ONLY”.
5 Press .
6 Press .
7 If the AUTO ANSWER light is off, turn it on by
pressing
.
FAX ONLY MODE
AUTO ANSWER
MENU
SETUP ITEM [ ]
START/SET/COPY
MODE=FAX ONLY ▼▲
MODE=TAD/FAX ▼▲
START/SET/COPY
AUTO ANSWER
7 7
1.SYSTEM SET UP
MENU
■ For KX-FP121/KX-FM131
If you have a telephone line just for receiving faxes, we recommend the
following setup.
Line 1 – Voice calls
Line 2 – Fax calls
Only a fax machine
is connected.
Example: One telephone line is used for voice calls and a separate telephone line for faxes. If someone sends
a fax to Line 2, the fax machine will ring.