Pioneer AVIC-Z1 - Manual (Page 131)

129
C
hapt
er
13
U
s
ing
the AV Sour
ce
(XM
, SIRIU
S
)
AV
Category Mode :
You can select a channel within selected cate-
gory when you operate.
(5) Select a XM band
Touch [Band] repeatedly until the desired XM
band is displayed, XM 1, XM 2 or XM 3. This is
useful for switching the preset.
(6) Switching the touch keys to next page
(7) Memorizing the current song*
The song title and artist name being broadcast
will be memorized in My Mix. When the song that
matches the song information memorized in My
Mix is broadcast, you can tune the channel to the
one that is broadcasting that song.
➲ “Using the My Mix function” ➞ Page 130
(8) Setting the notification of the memorized
tracks*
You can set the song information memorized in
My Mix. You can also delete the memorized song.
➲ Setting the notification of the memorized
tracks
➞ Page 130
➲ Deleting the memorized tracks ➞ Page 130
(9) Selecting a XM channel directly
You can select a XM channel directly by entering
the desired channel number.
Enter the channel number, touch [Enter], and
then touch [Back].
❒ To cancel the input numbers, touch [Clear].
❒ This function in not available with GEX-
P900XM.
(10) Switching the touch keys to previous
page
(11) Switching the channel category
Touch [Up] or [Down] to select the desired cate-
gory.
(12) Switching the XM information
Each touch of [Disp] changes the display on the
bottom of the detail information as follows:
GEX-P900XM:
Channel name — Artist name/feature — Song/
program title — Information — Channel number
GEX-P910XM:
Channel name — Artist name/feature — Song/
program title — Channel category
❒ This function is not available with GEX-
P10XMT and GEX-P920XM.
Display the Radio ID
If you select CH: 000, the Radio ID is displayed.
1
Touch [10Key Direct].
2
Input [000] and then touch [Enter].
If you select another channel, display of the
Radio ID is canceled.
❒ You can also display the Radio ID to select
[RADIO ID] from channel category in the
Category Mode.
Selecting a channel from the XM
channel list display
The list content can be switched so you can
search for the track you want to listen to not only
by the channel name but also by the artist name
or song title.
❒ The channel list shows all channels during
the All Ch Mode, and the channels included
in the selected category during the Category
Mode. To switch the channel mode, touch
[Mode].
1
Touch [List].
XM channel list appears in the display.
Each touch of the [List] changes the settings
as follows:
Detail information display — Ch Name List
(Channel name) — Song Title List (Song title)
— Artist Name List (Artist name)
2
Touch the desired channel that you want
to listen to.
Touch or to switch to the next page or
previous page.
❒ During the Category Mode, touch [Up] or
[Down] to switch to another category.