Pioneer AVIC-Z1 User Manual
Page 189
 
187
Ap
p
e
ndix
NA
V
I/
A
V
Nothing is displayed and the touch 
panel keys cannot use.
The setting for the rear view camera 
is incorrect.
Connect a rear view camera cor-
rectly.
The shift lever was placed in [R] 
when the rear view camera was not 
connected.
Press the AV button to return to the 
source display and then select the 
correct polarity setting for Camera 
Input.
➲ About Camera Input setting ➞
The back light of the LCD panel is 
turned off.
Press the V button to turn on the 
back light.
Touch panel key is not respond or dif-
ferent key is respond.
Touch keys deviate from the actual 
positions that respond to your touch 
for some reason.
Perform the touch panel calibration.
“Adjusting the Response Positions of 
the Touch Panels (Touch Panel Cali-
bration)” 
CD recording is not possible.
The disc cannot record, such as MP3 
disc, DVD-video, is inserted.
The disc other than normal music CD 
can not be recorded.
CD recording doesn’t stop though 
the record progress indicator shows 
100%.
Music Library recording will be can-
celed after playback of the current 
track is finished. (The recording 
mode stops at the interval of the 
tracks.)
Wait until the current track is ended 
or change the source manually.
“NO SIGNAL” is displayed at the right 
corner on the map.
While waiting for a response from 
the XM tuner.
Wait for a while and try the operation 
again.
You are in an area that cannot 
receive XM tuner reception.
Move into an area that can receive 
XM tuner reception.
Your current location provides very 
poor reception.
Change your location.
“UPDATING” is displayed at the right 
corner on the map.
Service subscription is either 
XM audio only or XM NavTraffic 
stand alone.
Since the GEX-P10XMT is capable of 
receiving both XM audio and XM 
NavTraffic service, if you are sub-
scribed to only one or the other, the 
system checks to see if you have 
added another service to your 
account since you last powered on 
the navigation system. When you 
subscribe to both services, this mes-
sage will stop appearing when you 
turn the ignition ON (ACC ON).
Symptom
Cause
Action (See)