Panasonic EP1080 - Manual (Page 11)

10
English
2 POWERING UP THE UNIT
See Warning No. 8 on page 1.
1 Make sure the power plug is functional.
Make sure the power plug is undamaged. Make sure the power plug is free of foreign matter and debris.
2 Plug the power plug into an electrical outlet.
3 Verify that the lock switch key is turned to the “open” position.
If in “lock” position, turn the lock switch key to “open”.
4 Slide the power switch to the “on” position.
3 CHECK THE UNIT
1
3 1 Make sure the covering is free of rips or tears.
2 Make sure there are no obstacles between
the parts of the unit.
3 Make sure the massage heads are in the
retracted position, i.e. they are parked to the
left and right in the upper part of the backrest.
If not retracted, press twice to return the massage heads to the
retracted position.
4 Make sure the legrest is lowered.
Do not sit on the legrest when it is raised. Doing so may cause it to
collapse down or bend the legrest. The legrest is not meant to
support full body weight.
See Warning No. 14 on page 2.
•
4 ADJUSTING FOR CORRECT PILLOW HEIGHT
Velcroes
Adjust the pillow height so that the bottom edge
of the pillow is at ear level.
If positioned too low, the pillow can lessen the effect of massage around the
neck area. •
5 ADJUSTING THE RECLINING ANGLE
Press and to adjust the angle of the backrest and legrest.
With the button held down, movement will continue until a “beep-beep-beep” sound indicates the backrest has been raised or
lowered as far as possible.
The legrest will start to move shortly after the backrest.
Approx. 80˚
Approx. 0˚
Approx. 120˚
Approx. 170˚
* The reclining operation is a function that adjusts the angle of the backrest and legrest. Avoid using it for any other purposes,
such as continuous up/down operation etc.
•
•
•
•