3 how to move the unit, 4 install the armrests on the unit, Install the armrests – Panasonic EP1080 User Manual

Page 9: Secure the armrests with attachment screws, Put both ends of the zipper into the inside

Advertising
background image

8

English

3 HOW TO MOVE THE UNIT

Using the wheels to move the unit

Grasp the legrest to move the unit when using the wheels.
It is easier to move the unit with the massage heads
retracted and the backrest in the upright position.

* Place a mat or cloth on the floor and move the unit slowly

to prevent floor damage.


Lifting the Unit

Move the unit by having one person hold the legrest and
another person use the handles on the back.

* Please hold the handles and legrest securely to avoid

dropping the unit as it may damage your floor.

Move it slowly

Legrest

Wheels

Place your
fingers inside
the handle

4 INSTALL THE ARMRESTS ON THE UNIT

Front

Back

Left

Velcro

Zipper

Convex

Front

Rear

Round hole

1

Install the armrests.

(Be careful to avoid damaging the coated fabric.)

1 Unfasten the velcro.

2 Unfasten the zipper of the armrest completely.

3 Check the side (right or left) of the armrest. Check

the direction (front or back) of the armrest as well.
The illustration shows the left armrest. The right armrest
is stamped “Front”, “Right” and “Back”.

* The left armrest must be installed on the left hand side of

the unit.

4 Align the convex portion of the armrest with the

round hole on the unit, and embed the armrest on
the unit. Avoid catching the coated fabric between
them.
If it is caught, pull it out without damaging the fabric.

Lift up

Secure with screws

Allen key

2

Secure the armrests with attachment
screws.

(Total of 4 positions for a single armrest)
Lift the coated fabric on the side of the armrest and
insert the attachment screw onto the end of the Allen
key, and then tighten.
(Tighten the screws in the 4 positions lightly at first, and
then tighten all screws firmly.)
* If the screw does not enter into the hole, tighten the screw

by pushing the armrest from the top.

3

Close the zipper at the bottom side of
the armrests.

When closing the zipper, be careful not to twist the end of
the zipper.

1 Set the zipper.

2 Fasten the zipper.

4

Put both ends of the zipper into the
inside.

1 Turn in the edge of the zipper.

2 Fix the sliding tab of the zipper with the velcro.

Advertising