Panasonic KX-TG5976AL - Manual (Page 40)

Programming
40
Programmable settings
You can customize the unit by programming the following features using the handset. To
access the features, there are 2 methods:
– scrolling through the display menus (page 40)
– using the direct commands (page 45)
L Mainly the direct command method is used in these operating instructions.
L To change the base unit ringer volume and tone, see page 26.
Programming by scrolling through the display menus
1
{ MENU} (middle soft key)
2
Press {^}, {V}, {<}, or {>} to select the desired menu. i {SELECT}
L If there are sub-menu(s), press {^} or {V} to select the desired item. i {SELECT}
Example: To access the handset ringer volume setting
Press {^}, {V}, {<}, or {>} to select (. i {SELECT}
Then press {^} or {V} to select “Ringer volume”. i {SELECT}
3
Press {^} or {V} to select the desired setting.
L
This step may vary depending on the feature being programmed.
4
{
SAVE} i {OFF}
TG5971AL_5976AL.book Page 40 Friday, March 3, 2006 3:32 PM