Panasonic KX-TG5976AL - Manual (Page 71)

Useful Information
71
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message Cause/solution
Busy L
The called handset or base unit is in use.
L Privacy mode is on for the call you tried to join (page
28).
L
Other units are in use and the system is busy. Try again
later.
Dial locked L Dial lock is turned on. To turn it off, see page 28.
Error!! L The handset’s registration has failed. Move the handset
and base unit away from all electrical appliances and try
again.
L 8 handsets have already been registered to the base
unit. A previously deregistered handset number may
still be retained in the base unit. To register an
additional handset, erase the unnecessary handset
number using the base unit:
Press and hold {INTERCOM} until the IN USE indicator
flashes. i Press and hold the handset’s extension
number ({1} – {8}) that you want to cancel/delete from
the base unit until a beep sounds.
L
The entered password was wrong in programming dial
lock. Enter the correct password.
Failed L
The handset you tried to copy phonebook items to is in
use.
L
The handset you tried to copy phonebook items to is out
of area.
Incomplete L
The destination handset’s phonebook memory is full.
Erase unnecessary items from the destination
handset’s phonebook (page 33).
Invalid.
Please register
to the base unit L
The handset is not registered to the base unit. Register
the handset (page 65).
TG5971AL_5976AL.book Page 71 Friday, March 3, 2006 3:32 PM