Panasonic KX-TG5976AL - Manual (Page 47)

Programming
47
*1 If “System setting” column is checked, you do not need to program the same item using
another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after lifting
up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing
any keys, including confirmation tones and error tones.
*4 The recall time depends on your telephone exchange or host PBX. Consult your PBX
supplier if necessary.
You can access your service provider/telephone company “Call Waiting” service by
having the recall time set at 100 ms, and then follow your service provider/telephone
company “Call Waiting” instructions to operate this service.
*5 Generally, the line mode setting should not be adjusted. If S is not displayed or
the IN USE indicator on the base unit does not light properly when another phone
connected to the same line is in use, you need to change the line mode to “A”.
*6 This feature allows the unit to automatically adjust the date and time setting when caller
information is received. To use this feature, set the date and time first.
Color display models only: KX-TG5976AL/KX-TGA591AL
*1 If “System setting” column is checked, you do not need to program the same item using
another handset.
To play all
(All message playback) { 3}{2}{4} – – 55
To play new
(New message
playback) {
3}{2}{3} – – 55
VM tone detect { 3}{3}{2} { 1}: <On> {0}: Off r 61
Feature Feature
code Setting code System
setting
*1
Page
Appearance
(Display color) {
1}{8}{2}
{
1}: <Color1>
{ 2}: Color2 {3}: Color3
{
4}: Color4 {5}: Color5
– –
Memory status {
6}{7}{0} – – 51
Wallpaper {
1}{8}{1} – – 51
Feature Feature
code Setting code System
setting
*1
Page
TG5971AL_5976AL.book Page 47 Friday, March 3, 2006 3:32 PM