Panasonic AM1 (NZ BASIC) - Manual (Page 8)

AM1
4. Oil tight types mm General tolerance: ±0.4
The pushbutton part is sealed with the rubber cap and the connected part between the cap and body is also coated with resin so that
these parts are kept away from foreign matters. This type has resistance to oil.
Rigid lever
AM1511KF (Solder terminal)
AM1711KF (Screw terminal)
26.1
20.1 ±0.5
F.P.
O.P.
R63.5
Plunger seal
4.8
Lever: Stainless steel
Operating force,
max.
0.69 N
Release force,
min.
0.14 N
Pretravel,
max. mm
10
Movement differential,
max. mm
1.5
Overtravel,
min. mm
5.6
Operating position,
mm
19.1 ±0.7
Rigid short roller lever
AM1514KF (Solder terminal)
AM1714KF (Screw terminal)
26.1
20.1 ±0.5
16.9 ±0.8
F.P. O.P.
R26.7
Plunger seal
Roller 9.5 dia. ×4:
Plastic
Operating force,
max.
1.67 N
Release force,
min.
0.42 N
Pretravel, max.
mm
4.5
Movement differential,
max. mm
0.7
Overtravel,
min. mm
2.4
Operating position,
mm
30.2 ±0.4
Rigid roller lever
AM1513KF (Solder terminal)
AM1713KF (Screw terminal)
26.1
20.1 ±0.5
16.9 ±0.8
F.P.
O.P.
R48.3
Plunger seal Roller 9.5 dia. ×4:
Plastic
Operating force,
max.
0.98 N
Release force,
min.
0.20 N
Pretravel,
max. mm
7.5
Movement differential,
max. mm
1.3
Overtravel,
min. mm
3.6
Operating position,
mm
30.2 ±0.7
All Rights Reserved © C OPYRIGHT Panasonic Electric Works Co., Ltd.