Panasonic CF-29 - Manual (Page 16)

16
Operation
1
Open the display.
Starting Up/Shutting Down
Starting Up
2
Turn your computer on.
Slide the power switch and hold it for approximately one second until the power indicator
turns on before releasing it.
Under the condition that both the AC adaptor and the port replicator are not con-
nected, the power will not go on if the display is closed.
While booting, avoid the following until the hard disk drive indicator (
) has
turned off.
• Connecting or disconnecting the AC adaptor.
• Touching the power switch.
• Performing any keyboard, touch pad, touchscreen (only for models with touch-
screen), or external mouse operations.
• Closing the display.
Once the computer is powered off, you must wait at least ten seconds before pow-
ering it on again.
When the CPU temperature rises, the computer may not power on to prevent the
CPU from overheating. Should this happen, allow the computer to cool down then
switch the power on again.
If the computer still does not power on, contact Panasonic Technical Support.
CAUTION
1 Pull the carrying handle forward.
2 Press the latch as illustrated.
3 Lift up the latch and open the display.
Power Indicator
Power Switch
1
2
3
Latch
Three incorrect attempts
or
No password for about a minute
The correct password
Will Start
Enter your password* 1 and press Enter . ( “Security Measures”)
Will Not Start
(Power off)
If [Enter Password] is displayed
* 1 Supervisor Password or User Password set in the Setup Utility (not
the Windows password).
Enter Password [ ]
POWER
When the power is turned on, sometimes the message “Warming up the system (up
to 20 minutes)” is displayed or the battery indicator alternately blinks green and
orange. This function is designed to prevent hard disk drive malfunctions that may
occur at low temperatures. Wait for the computer to start up.
NOTE