Installation – Panasonic AW-PH650N User Manual
Page 18
18
Installation
<When the AW-E350 or AW-E650 camera is used>
Use the 2 screws supplied with the camera to attach
the mounting adapter (supplied with the camera) to
the top panel of the camera.
Attach the positioning screw (supplied) to the camera
mounting spacer .
Use the 2 screws (supplied) to attach the camera
mounting spacer to the mounting adapter (supplied
with camera) on the top panel of the camera.
Attach the camera mount to the camera mounting
spacer using the 2 screws , flat washers and
spring washers (supplied).
( Make sure that the two sides of the camera mount are
higher than the central area that is attached.)
Attach the lens to the camera.
Remove the lens hood and zoom lever.
<When the AW-E750 or AW-E860 camera is used>
Attach the positioning screw (supplied) to the camera
mounting spacer .
Use the 2 screws (supplied) to attach the camera
mounting spacer to the fan mounting seat on the
top panel of the camera.
Attach the camera mount to the camera mounting
spacer using the 2 screws , flat washers and
spring washers (supplied).
( Make sure that the two sides of the camera mount are
higher than the central area that is attached.)
Attach the lens to the camera.
Remove the lens hood and zoom lever.
The camera mount in the opposite direction from when the AW-E655 is used as the camera.
To ensure that none of the screws are loose, use a tool to tighten them up securely.