Maintenance, Cleaning tool, Transparent guard – Panasonic EY4542 User Manual

Page 19

Advertising
background image

- 19 -

Lamp Indications

Green Lit

Charger is plugged into the AC outlet.

Ready to charge.
Green Flashing Quickly

Charging is completed. (Full charge.)
Green Flashing

Battery is approximately 80% charged (Usable charge. Li-ion

only).
Green Lit

Now charging

Orange Lit

Battery pack is cool.

The battery pack is being charged slowly to reduce the load on

the battery. (Li-ion only)
Orange Flashing

Battery pack is warm. Charging will begin when temperature of

battery pack drops.
If the temperature of the battery pack is -10°C or less, the

charging status lamp (orange) will also start flashing. Charg-

ing will begin when the temperature of the battery pack goes

up (Li-ion only).
Charging Status Lamp

Left: green Right: orange will be displayed.

Both Orange and Green Flashing Quickly

Charging is not possible. Clogged with dust or malfunction of

the battery pack.

X

.

MAINTENANCE

WARNING

To avoid severe personal injury, always remove

the battery pack from the tool before starting any

maintenance procedure.

CAUTION:

To assure product SAFETY and RELIABILITY,

servicing should be performed by an autho-

rized service center. Always insist on genuine

Panasonic replacement parts.

Cleaning Tool

Keep your tool clean for good cutting perform-

ance, and to help keep it safe to use.

Follow these steps:

1. Remove the battery pack from the tool.
. Wipe the tool with a dry, soft cloth. Do not

use a wet cloth or cleaning liquids.

They could damage the tool’s finish.
3. Be sure to rub off any oil or grease which

could make the tool slippery or hard to handle.

4. Remove the blade and brush off any dust.
CAUTION:

To avoid injury or damage to the unit, never

immerse any part of the tool in a liquid.

Transparent Guard

WARNING

If the guard is cracked, or is broken, take the tool

to an authorized service center for replacement.

Do not attempt to operate tool. It could result in

serious personal injury.

Never use your tool with a damaged transparent

guard or without the transparent guard installed.

Flying chips could result in serious injury.

Advertising