Panasonic EY4542 - Manual (Page 20)

- 0 -
XI
.
ACCESSORIES
WARNING
• The use of any accessories not specified
in this manual may result in fire, electric
shock, or personal injury. Use recommended
accessories only.
• Use of a blade on material that is thicker
or thinner than that recommended for that
blade will result in a rough cut, and could
increase the risk of “kickback” or other injury.
Carbide-tipped Blade for Metal
• EY9PM13C
For cutting unhardened ferrous material
Thickness of material
0. mm – .0 mm (1/3"-1/4")
Carbide-tipped Blade for Thin Metal (Optional
accessory)
• EY9PM13D
For cutting unhardened thin ferrous thin material
that clean cutting edge required
Thickness of material
0. mm – .0 mm (1/3"-1/4")
Carbide-tipped Blade for Wood (Optional
accessory)
• EY9PW13A
For cutting wood in general
Carbide-tipped Blade for Thin Wood (Optional
accessory)
• EY9PW13B
For cutting thin wood that clean cutting edge
required
Recommended thickness of material up to 1
mm
Carbide-tipped Blade for Plastic (Optional
accessory)
• EY9PP13B
For cutting plastic
Recomneded thickness of material acrylic and
vinyl chloride plates:
.0 mm – .0 mm (/4" – 3/1")
corrugated pates, pipes
0.8 mm – .0 mm (1/3" – 3/1")
Vacuum hose adaptor (Optional accessory)
• EY9X01E
Rip Fence (Optional accessory)
• EY300B777
For convenience of rip cuts and repeated cut of
uniform width
XII . SPECIFICATIONS
Motor voltage 14.4 V DC
Blade speed 300 min -1 (rpm)
Blade size
Outside diameter 13 mm (-3/8")
Arbor size 0 mm (/3")
Maximum cutting depth 0 – 4 mm (0" – 1-13/1") (φ13 mm blade)
Overall length 39 mm (1-1/4")
Weight (with battery pack: EY9L40) . kg (.7 lbs)
BATTERY PACK
Model EY9L40
Storage battery Li-ion Battery
Battery voltage 14.4 V DC (3. V x 4 cells)
Capacity 3 Ah