Pioneer Plasma Display Panel PDP-504CMX - Manual (Page 10)

8
RS-232C Adjustment Mode
GRA GRADATION: ####### Displays the current GRADATION setting
¶
GRAS01 GRADATION: GAMMA 2.0 Sets GRADATION to ‘GAMMA 2.0’.
‡
GRAS02 GRADATION: GAMMA 1.8 Sets GRADATION to ‘GAMMA 1.8’.
‡
GRAS03 GRADATION: GAMMA 2.2 Sets GRADATION to ‘GAMMA 2.2’.
‡
GRAS04 GRADATION: DRE MID Sets GRADATION to ‘DRE MID’.
‡
GRAS05 GRADATION: DRE HIGH Sets GRADATION to ‘DRE HIGH’.
‡
GRAS06 GRADATION: DRE LOW Sets GRADATION to ‘DRE LOW’.
‡
GRAS07 GRADATION: HIGH CNT. Sets GRADATION to ‘HIGH CONTRAST’.
‡
GSL G SIDE MASK LEVEL: ∗∗∗ Adjusts the GREEN side mask.
‡ ‡
GSO (GET STATUS OPTIONDATA) Gets OPTION data.
¶ ¶
GSS (GET STATUS SETUP DATA) Gets SETUP data.
¶ ¶
GST (GET STATUS) Gets STATUS.
¶ ¶
GWB (GET WHITE BAL.DATA) Gets integrator WHITE BALANCE data.
¶ ¶
[H]
HPS H. POSITION: ∗∗∗ Adjusts the HORIZONTAL POSITION.
‡ ‡
HSI H. SIZE: ∗∗∗ Adjusts the HORIZONTAL SIZE.
‡ ‡
[ I ]
IDC ID CLEAR Clears the ID.
‡
DS ID No.: ∗∗ Sets the ID.
‡ ‡
IN1 INPUT1 Switches the main screen to INPUT1.
‡ ‡
IN2 INPUT2 Switches the main screen to INPUT2.
‡ ‡
IN3 INPUT3 Switches the main screen to INPUT3.
‡ ‡
IN4 INPUT4 Switches the main screen to INPUT4.
‡ ‡
IN5 INPUT5 Switches the main screen to INPUT5.
‡ ‡
INP INPUT# Displays the current input function for the main screen.
¶ ¶
INPS01 INPUT1 Switches the main screen to INPUT1.
‡ ‡
INPS02 INPUT2 Switches the main screen to INPUT2.
‡ ‡
INPS03 INPUT3 Switches the main screen to INPUT3.
‡ ‡
INPS04 INPUT4 Switches the main screen to INPUT4.
‡ ‡
INPS05 INPUT5 Switches the main screen to INPUT5.
‡ ‡
[L]
LEN FRONT INDICATOR: OFF Turns OFF the front indicator.
‡
LEY FRONT INDICATOR: ON Turns ON the front indicator.
‡
LNN LOUDNESS: OFF Disables LOUDNESS.
‡ ‡
LNY LOUDNESS: ON Enables LOUDNESS.
‡ ‡
[M]
MCD COLOR DECODING: ∗∗∗∗∗∗ Displays the current COLOR DECODING.
¶
MCDS01 COLOR DECODING: RGB Sets COLOR DECODING to RGB (VIDEO).
‡
MCDS02 COLOR DECODING: COMPONENT1 Sets COLOR DECODING to COMPONENT1 (Y CbCr).
‡
MCDS03 COLOR DECODING: COMPONENT2 Sets COLOR DECODING to COMPONENT2 (Y PbPr).
‡
MCN MASK CONTROL: OFF Turns OFF MASK CONTROL.
‡
MCY MASK CONTROL: ON Turns ON MASK CONTROL.
‡
MGF ############# Displays the 2 x 2 ON/OFF status.
¶ ¶
MGFS00 2 x 2: OFF Turns OFF 2 x 2 (4-screen multi).
‡ ‡
MGFS01 2 x 2: ON Turns ON 2 x 2 (4-screen multi).
‡ ‡
MGP ############# Displays the current 2 x 2 seam-consideration/magnification position.
¶
MGPS01 2 x 2 NORMAL UP LEFT Sets 2 x 2 to upper left (no seam consideration).
‡
MGPS02 2 x 2 NORMAL DOWN LEFT Sets 2 x 2 to lower left (no seam consideration).
‡
MGPS03 2 x 2 NORMAL UP RIGHT Sets 2 x 2 to upper right (no seam consideration).
‡
MGPS04 2 x 2 NORMAL DOWN RIGHT Sets 2 x 2 to lower right (no seam consideration).
‡
MGPS05 2 x 2 ADJUSTED UP LEFT Sets 2 x 2 to upper left (seam consideration).
‡
MGPS06 2 x 2 ADJUSTED DOWN LEFT Sets 2 x 2 to lower left (seam consideration).
‡
MGPS07 2 x 2 ADJUSTED UP RIGHT Sets 2 x 2 to upper right (seam consideration).
‡
MGPS08 2 x 2 ADJUSTED DOWN RIGHT Sets 2 x 2 to lower right (seam consideration).
‡
Command name AJY (232C integrator) Display
RS-232C
Adjustment
Validity
Normal
Validity
Numerical
Direct
Validity
Remarks