9rs-232c adjustment mode – Pioneer Plasma Display Panel PDP-504CMX User Manual
Page 11
9
RS-232C Adjustment Mode
MIR
MIRROR MODE: ###
Displays the current MIRROR MODE setting.
¶
MIRS00
MIRROR MODE: OFF
Turns the MIRROR MODE OFF (normal display).
‡
MIRS01
MIRROR MODE: X
Sets the MIRROR MODE to left-right reversal.
‡
MIRS02
MIRROR MODE: Y
Sets the MIRROR MODE to up-down reversal.
‡
MIRS03
MIRROR MODE: XY
Sets the MIRROR MODE to up-down, left-right reversal.
‡
MNR
MPEG NR: ######
Displays the current MPEG NR setting.
¶
MNRS00
MPEG NR: OFF
Turns MPEG NR OFF.
‡
MNRS01
MPEG NR: LOW
Sets MPEG NR to LOW.
‡
MNRS02
MPEG NR: MIDDLE
Sets MPEG NR to MIDDLE.
‡
MNRS03
MPEG NR: HIGH
Sets MPEG NR to HIGH.
‡
MSC
###########
Displays 2-screen display operation ON/OFF.
¶
¶
MSCS00
MULTISCREEN: OFF
Turns the 2-screen display operation OFF.
‡
‡
MSCS01
MULTISCREEN: ON
Turns the 2-screen display operation ON.
‡
‡
MST
###########
Displays the current 2-screen operation type.
¶
¶
MSTS01
2SCREEN
Sets 2-screen operation to 2 SCREEN.
‡
‡
MSTS02
PinP DOWN RIGHT
Sets 2-screen operation to PinP (lower right).
‡
‡
MSTS03
PinP UP RIGHT
Sets 2-screen operation to PinP (upper right).
‡
‡
MSTS04
PinP UP LEFT
Sets 2-screen operation to PinP (upper left).
‡
‡
MSTS05
PinP DOWN LEFT
Sets 2-screen operation to PinP (lower left).
‡
‡
MSTS06
PoutP
Sets 2-screen operation to PoutP.
‡
‡
MTN
VIDEO MUTING: OFF
Turns OFF video muting.
¶
¶
MTY
VIDEO MUTING: ON
Turns ON video muting.
¶
¶
[O]
OMN
ORBITER: OFF
Turns ORBITER OFF.
‡
OMY
ORBITER: ON
Turns ORBITER ON.
‡
[P]
PLN
BRIGHT ENHANCE: OFF
Turns the center brightness enhancement OFF.
‡
PLY
BRIGHT ENHANCE: ON
Turns the center brightness enhancement ON.
‡
POF
–
Power OFF
‡
‡
PON
–
Power ON
‡
PUC
PURECINEMA: ######
Displays the current PURECINEMA setting.
¶
PUCS00
PURECINEMA: OFF
Turns PURECINEMA OFF.
‡
PUCS01
PURECINEMA: STANDARD
Sets PURECINEMA to STANDARD.
‡
PUCS02
PURECINEMA: ADVANCE
Sets PURECINEMA to ADVANCED.
‡
[R]
RHI
R HIGH:
∗∗∗
Adjusts R. HIGH.
‡
‡
RLW
R LOW:
∗∗∗
Adjusts R. LOW.
‡
‡
RSL
R SIDE MASK LEVEL:
∗∗∗
Adjusts the RED side mask.
‡
‡
[S]
SFT
SIGNAL FORMAT: ####
Displays the current SIGNAL FORMAT.
¶
SFTS01
SIGNAL FORMAT:
Sets the SIGNAL FORMAT to PC FORMAT 1
‡
VGAorXGAorSXGAor720PC
(VGA or XGA or SXGA or 720PC).
SFTS02
SIGNAL FORMAT:
Sets the SIGNAL FORMAT to PC FORMAT 2
‡
WVGAorWXGAorSXGA+
(WVGA or WXGA or SXGA+).
SFTS03
SIGNAL FORMAT:
Sets the SIGNAL FORMAT to VIDEO 525p or VIDEO 750p.
‡
VIDEO 525p or VIDEO 750p
SFTS04
SIGNAL FORMAT: PC AUTO
Sets the SIGNAL FORMAT to PC AUTO.
‡
SHP
SHARPNESS:
∗∗∗
Adjusts the SHARPNESS.
‡
‡
SIM
SIDE MASK MODE: ######
Displays the current side mask setting.
¶
SIMS01
SIDE MASK MODE: NORMAL
Sets the side mask setting to normal.
‡
SIMS02
SIDE MASK MODE: OVERLAY1
Sets the side mask setting to OVERLAY1.
‡
SIMS03
SIDE MASK MODE: OVERLAY2
Sets the side mask setting to OVERLAY2.
‡
SLN
–
Turns the STILL setting to OFF.
‡
SLY
STILL
Turns the STILL setting to ON.
‡
Command name
AJY (232C integrator) Display
RS-232C
Adjustment
Validity
Normal
Validity
Numerical
Direct
Validity
Remarks