Panasonic AG-VP320 - Manual (Page 39)

39
DVD Operation
Program Repeat Play
(Video CD/CD only)
4
Press SET to enter Select mode.
5
Press to select “DISC.”
(DECK Information Screen)
(DECK Information Screen)
1
Do operation steps 1 through 5 on the
previous page.
2
Press DISPLAY to display Disc Information
screen.
(Disc Information Screen)
3
Press DISPLAY to display DECK Information
screen.
6 Press SET to set mode.
Cursor moves to “REPEAT.”
To cancel, select “REPEAT : OFF” in step 5,
then press
SET.
• Up to 16 tracks can be programmed.
• “ ” or “ ” (depending on disc) indicates
additional PROGRAM PLAY screen.
Press
for next or previous
screen.
• To clear the last programmed track
Press to move to “CLEAR LAST”
and press SET. (Pressing CLEAR also
clears.)
• To clear all programs
Press to move to “CLEAR ALL”
and press SET. (Programs are also
cleared when the power is turned off or
the disc is removed.)
*Important: If a remote control button does not work when pressed,
press the DVD button on the remote and try the button again.
Notes