Panasonic AG-VP320 - Manual (Page 9)

9
Initial Setup
Audio/Video Input
Connector 2
(LINE 2)
p. 35
CHANNEL /
TRACKING/V-LOCK
pp. 4, 21
POWER
OPEN/CLOSE
p. 22
STOP/EJECT
p. 20
Light-up
Indicators
p. 11
REC
p. 21
Disc Tray
Cassette
Compartment
PLAY
p. 20
Remote
Sensor
Front View of DECK
STOP
p. 22
Bold: VCR Function
Italic: DVD Function
Bold Italic: VCR and DVD Functions
Normal: Others
PLAY
p. 22
If the disc cannot be removed...
First, unplug DECK. Then, prepare a rigid wire
(e.g. an extended paper clip) and, applying
moderate force, insert it straight into the hole at
the base of the tray.
The tray will eject a little. Now, pull the tray all
the way out and remove the disc.
Over 2 inches
Returns to factory setting. Use if relocating DECK, or if Initial Setup needs to be redone.
• Make sure a tape is not inserted in the DECK.
Reset All Memory Functions
Press and hold both VCR PLAY and
CHANNEL
on the DECK for more
than 5 seconds.
• The power shuts off.
Turn DECK Power on.
3
Perform “Initial Setup (Ready to Play)”
on page 16.
2
1
2 1
REWIND / SEARCH /
SKIP
p. 20, 23
FAST FORWARD
/ SEARCH /
SKIP
p. 20, 23