Panasonic DMR-EZ28 - Manual (Page 23)

23
RQT9046
Ad
vanced Features
Playing while you are recording
Chasing Playback
RAM
Allows playback from the beginning of what you are recording.
When recording to DVD-RAM
(at least 20 seconds after
recording starts)
If the “Status Messages” in the Setup menu is set
to “Automatic” (
➔ 52), both the “Play” and “Rec.”
indicators will be displayed on the status message
screen for several seconds.
–
Tips
To stop play
Press [g STOP] once.
To stop recording
Press [g STOP] at least 2 seconds after chasing playback stops.
Simultaneous Record and Playback
RAM
Allows playback of a previous recording, while
recording something else.
When recording to DVD-RAM
e, r, w, q to select the recording
to play, then
If the “Status Messages” in the Setup menu is
set to “Automatic” (
➔ 52), both the play and
rec indicators will be displayed on the status
message screen for several seconds.
–
Tips
To stop play
Press [g STOP].
To exit the DIRECT NAVIGATOR screen
Press [DIRECT NAVIGATOR].
To stop recording
After play stops
1. Press [DIRECT NAVIGATOR] to exit the screen.
2. Press [g STOP].
Notes
During playing while you are recording, you cannot edit or delete
recordings.
Closed captions will not appear during simultaneous recording and
playback.
Use caution while operating the controls for playback. Pressing
[g STOP] when the recording device is selected will cancel the
recording in progress. •
•
•
To cancel a scheduled recording in progress
to select the DVD drive.
Confirmation screen appears. –
w to select “Stop recording”, then
Notes
Recording stops and ‘one-time’ programs are deleted from the Schedule
List. Programs scheduled to record ‘Daily’ and ‘Weekly’ remain on the
Schedule List and are set to begin at the next scheduled time.
Check, Change, or Delete Programs
The scheduled recording list can be viewed even when
the unit is in “recording standby” mode.
See “Tips” ( ➔ 24) for explanation of icons
displayed.
–
e, r to select the program.
3a
to modify the program.
e , r, w, q to make changes,
then
3b
or
, then to delete.
You cannot delete programs that are currently
recording. –
“z” lights on the unit’s display. –
Notes
If the program schedule is changed by the TV station, then this unit will
not be able to detect the change.
The password screen appears when setting parental ratings (
➔47). Unless you
enter the correct password, recording the program with parental ratings may fail.
Continued on next page.
•
•
Advanced Scheduled Recording