Panasonic DMR-EZ28 - Manual (Page 24)

24
RQT9046
Tips
You can enter up to 16 programs a month in advance.
Schedule List Remaining Recording Time
3/26 Tue 12:53 PM
1:58 SP DVD
Channel No Date On
New Scheduled Recording
Off Mode Check
A B
A Schedule List screen icons
* : Currently recording
: Programs are overlapped. Recording of the program with
the later start time starts when the earlier program finishes
recording.
Q : You stopped a weekly or daily scheduled recording. The icon
disappears when the next scheduled recording starts.
: The disc was full. (not enough space)
: The TV program may not be recorded due to copy-protect or
ratings.
X : Recording stopped (Dirty disc, etc.)
PG! : Recording may become impossible when a wrong password is
entered through the unit’s parental rating setting procedure.
B Check
OK: Recordable
➔ (Date): The last day of daily or weekly recording
!: It may not be possible to record because:
the disc is write-protected.
there is no more space left.
the number of possible recordings has reached its
maximum.
Overlap: When the date and time overlap with another scheduled
recording, only a part of the program can be recorded.
To release the unit from recording
standby
(Before recording starts)
The unit turns on and “z” on the unit’s
display goes out. –
Be sure to press [^ DVD POWER] to return the unit to standby mode
before the scheduled recording time. Scheduled recording will work
only if “z” is displayed.
–
–
–
Recording from a VCR, etc.
Connect cables while the power to both the unit and
the external device is off.
Front of the unit
Yellow White Red
You can get a
sharper, clearer
picture by
connecting with
an S Video
cable instead of
the yellow video
cable.
USB
CH REC
/ 1.3 RESET SD CARD IN2 D V IN S VIDEO VIDEO L/MONO- A UDIO-R
Audio/Video
cable S Video cable
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
Turn on the unit and connected equipment.
RAM If the disc is protected, release protection
( ➔ 44).
When recording multilingual broadcasts ( ➔ 20)
•
•
•
Insert a disc.
to select the recording
mode ( ➔ 21).
1
OK
TV
2 IN1
3 IN2
4 DV
Input Select
e, r to select “IN1” or “IN2”, then
Back Panel inputs are IN1.
Front Panel inputs are IN2. –
–
Advanced Scheduled Recording Recording from an External Device