Panasonic DP-2010E - Manual (Page 26)

26
NOTE
1
Place the
Original
2 3
Number of
Copies
4
Press
START Select the Custom
Size (M1 or M2)
Upper-
left
corner
Platen
Skyshot Mode
■ ■ ■ ■ ■
Manual Skyshot Mode
When using this function, the custom size should be registered into memory (M1, M2) in
advance. (See page 32)
Other Features
2
∗
The default size for M1 is: 70(X)
×
160(Y) mm, and M2 is: 95(X)
×
220(Y) mm
C When changing the M1 or M2 size, consult with the key operator.
C When using the Manual Skyshot mode, M1 and M2 are turned ON and other
job memory cannot be used.
C Press the RESET key to cancel all job settings.
FUNCTION MODE (1-2)
ENTER NO. OR
∨ ∧
2:COPIER SETTINGS
PRESS SET TO SELECT
COPIER PARAM. (00-14)
ENTER NO. OR
∨ ∧
07 MANUAL SKYSHOT
2:M1 ON
# Press the FUNCTION key.
$ Press the 2 key to select COPIER SETTINGS.
% Press the SET key.
& Press 7 and SET key to select MANUAL SKYSHOT.
( Press 2 or 3 key to select the Custom Size.
1: OFF
NONE
2: M1 ON M1 size is ON *
3: M2 ON M2 size is ON *
4: M1, M2 ON Both sizes are ON
) Press the SET key.
* Press the RESET key.