Panasonic DP-2010E - Manual (Page 3)

3
Operation Chart
Common Features and Usage
■ ■ ■ ■ ■
Basic Operation
Original
1
Place the
Original
2
Original Size
(Reduction/
Enlargement
Only)
3
Copy Size
(Reduction/
Enlargement
Only)
4
Number
of Copies
5
Press
START
■ ■ ■ ■ ■
Position of the Original
Load Paper
Turn the Power
Switch On
C Place originals face down on the
platen or face up on the ADF.
C If the original is not positioned
properly, a portion of the original
may not be copied.
C For originals smaller than invoice
size, position the original within the
area of INVOICE and select invoice.
■ ■ ■ ■ ■
Commonly Used Functions and Operating Procedures
Full Size
Makes a copy that is the same
size as the original
1 4 5
Reduction or Enlargement
Copies the original at a fixed
reduction or enlargement ratio
1 3 4 2 5
■ ■ ■ ■ ■
Memory Capacity
When the memory becomes full during original scanning, the message “OUT OF MEMORY”
“CONTINUE? 1: YES 2: NO” will be displayed in the message display. In this case, follow the
operating instruction in the message display.
When additional memory is required, consult with an authorized servicing dealer.
(See page 12)
(See page 13)
Getting T
o
Kno
w
Y
our
Machine
INV INV LTR LGL LDR
LTR
LDR
INV
LTR
LGL
INV
INVOICE
INVOICE R LETTER R
LEGAL
LEDGER
LETTER
Original Guide
Original Guides
Adjust to the original’s width
ADF Tray
From Platen From ADF (or i-ADF)