Panasonic DP-2010E - Manual (Page 34)

34
Function Setting for Key Operator
■ ■ ■ ■ ■
Changing the Paper Size
The Paper Trays are designed to accommodate Invoice, Letter, Letter R, Legal and Ledger size
paper. To change the paper size, perform the steps shown below.
1
FUNCTION Key
2
Proceed as Follows:
# Press the 1 key to select GENERAL
FUNCTIONS.
$ Press the SET key.
% Press 9 key.
& Input the Key Operator ID code (3 digit)
and the SET key.
( Press 00 and 1 or 2 key to select
the PAPER SIZE.
) Press SET to select the paper tray and
press (
G or F ) keys to set the paper
size.
Paper size changes are as follows.
Letter R Invoice R
Ledger
Legal
* Press the SET key to set up the PAPER
SIZE.
+ Press the RESET key to exit the Function
mode.
Function
FUNCTION MODE (1-2)
ENTER NO. OR
∨ ∧
1:GENERAL FUNCTIONS
PRESS SET TO SELECT
GENERAL PARAM. (0-9)
ENTER NO. OR
∨ ∧
09 KEY OPERATOR MODE
ENTER PASSWORD=-
■ ■
KEY OPR. MODE (00-25)
ENTER NO. OR
∨ ∧
00 PAPER SIZE
1:TRAY-1[LTRB]
Letter
A3 B4 A4
A4R
B5
FLS2 FLS1 A5R B5R
Press the FUNCTION key.