POLAR CS600 User Manual
Page 10
A. Heart rate
B. Cadence*
C. Power*
Press OK.
A. For heart rate, select Sport zone, or Manual to set heart rate zone manually. Press OK.
•
Sport zone
: Select one of the sport zones (e.g. Z1: 50-59%HR
max
) for your exercise. Press OK to
continue to step 3.
Polar sport zones are heart rate intensity areas expressed in percentages of your maximum heart rate.
Five different sport zones are set in the cycling computer as a default:
very light
(50-59% HR
max
),
light
(60-69% HR
max
),
moderate
(70-79% HR
max
),
hard
(80-89% HR
max
), and
maximum
(90-99% HR
max
).
Default HRmax value is age-based, but if you know your exact aerobic and anaerobic thresholds, have
had your maximum heart rate (HR
max
-p) predicted in a Polar Fitness Test™, tested your maximum
heart rate yourself or in a lab, then you can define sport zones will better suit your training needs.
•
Manual
: Set the high and low zone HR limits as beats per minute (bpm) or HR% / HRR% and press
OK to continue to step 3.
B. If you selected
cadence
* or
power
*
zones
, set the high and low zone limits. Press OK to continue to
step 3.
•
If you choose cadence as a zone type, the zones will be expressed in rounds per minute (rpm).
•
If you choose power as a zone type, the zones will be expressed in watts.
3. Set
Zone guide
to change zones after a specified time or distance. During your workout, the cycling
computer will alert you when changing zones.
•
Timers
: Set a timer for the zone (minutes and seconds) and press OK.
•
Distances
: Set distance for the zone and press OK.
•
Off
: Deactivate timers and distances off and press OK.
Once you have defined the first zone,
Zone 1 OK
is displayed. For more than one exercise zone, repeat
steps 2 and 3 until all zones are defined.
When the exercise is ready,
New exercise added
is displayed. The new exercise (
NewExe
) is stored in the
Exercises menu, where you can select it for your next workout. Rename the exercise by selecting
Rename from the list.
Create a New Exercise Without Zones
To create a new exercise without zones, you can use timers or distances to guide your training.
Select
Settings
>
Exercises
>
Add new
1.
Number of zones
: Set the number of zones to 0.
2.
Guide type
: Choose to sound a timer during workout (reminding you to drink, for example), or set a
distance (for following lap times without recording them).
Timers
•
Number of timers
: Choose the number of timers (1-3) for the session. Press OK.
•
Timer 1
: Define minutes and seconds for the timer and press OK.
Distances
•
Number of distances
: Choose the number of distances (1-3) for the session. Press OK.
•
Distance 1
: Enter the distance(s) and press OK.
Repeat step 2 until you have defined timers or distances. When the exercise is ready,
New exercise
added
is displayed. The new exercise (
NewExe
) is stored in the Exercises menu, where you can select it
Polar CS600 User Manual
10