ParaBody 848 - Manual (Page 5)

FIGURE 1
STEP 1:
• SECURELY assemble the one 3/8 X 2-3/4” BOLT (25), two 3/8” WASHERS (19), and one 3/8” LOCK NUT (20) to the STAND (3) as
shown in FIGURE 1.
• Assemble two 3 x 2 END CAPS (15) onto the ends of the STAND (3) as shown in FIGURE 1.
• Insert two 3 X 2” END CAP (15) into the ends of the BASE (1) as shown in FIGURE 2.
FIGURE 2
STEP 2:
3/8 X 2-3/4” 25
19
15
15
20
1
3
13
• Assemble one 2” SQ. END CAP (13) into the end of the STAND (3) as shown in FIGURE 1.
5