ParaBody 848 - Manual (Page 9)

9
STEP 7:
FIGURE 7
• Route the CABLE (9) through the UPRIGHT (2) as shown in FIGURE 7.
• SECURELY assemble three 3-1/2” PULLEYS (11) into the slots of the UPRIGHT (2) using three 3/8 X 2-3/4” BOLTS (25), six 3/8” FLANGE
SPACERS (31), and three 3/8” LOCK NUTS (20) as shown in FIGURE 7. (NOTE: Make sure the cable is routed over all the pulleys.)
3/8 X 2-3/4” 25
2
9
31
20
11