Pride Mobility 1103 - Manual (Page 22)

22 Jazzy 1103
V. DISASSEMBLY
SEAT REMOVAL
You may wish to remove the seat to transport your Jazzy.
To remove the seat:
1. Turn the power off.
2. Make sure the Jazzy is not in freewheel.
3. Unplug main wire harness behind the seat.
4. Lift the seat up and out of the seat tower.
BODY SHROUD REMOVAL
The body shroud is a one-piece molded plastic body that covers the power base frame. You must remove the
body shroud in order to change the batteries and check the cable connections.
To remove the body shroud:
1. Turn the power off.
2. Make sure the Jazzy’s motor is disengaged. See III, “Operation.”
3. Unplug the controller wiring harness.
4. Remove the seat.
5. Lift the body shroud straight up. It should lift up easily.
6. Be sure to reengage the drive motors.
BATTERY REMOVAL
To remove the batteries, see VI, “Care and Maintenance.”