Hdmi mode and actual output signals, Connections en, 13 en – Philips Magnavox MRD410B/F7 User Manual

Page 13

Advertising
background image

13

EN

CONNECTIONS

EN

Component Video Connection

Standard Video Connection

You can change the resolution of the video signal being output from the HDMI OUT jack in the setup menu.
For details, refer to “HDMI Video Resolution” on page 37.

HDMI Mode and Actual Output Signals

SPEAKERS(4

Ω)

SUB-

WOOFER

FRONT

CENTER

REAR

FRONT

HDMI OUT

AUDIO IN

AUX

DIGITAL

AUDIO IN

COMPONENT VIDEO OUT

FM
ANT
75

Pr

Y

Pb

VIDEO OUT

B

COMPONENT

VIDEO IN

Y

PB/CB

PR/CR

Component video cable

Your TV

SPEAKERS(4

Ω)

SUB-

WOOFER

FRONT

CENTER

REAR

FRONT

HDMI OUT

AUDIO IN

AUX

DIGITAL

AUDIO IN

COMPONENT VIDEO OUT

FM
ANT
75

Pr

Y

Pb

VIDEO OUT

C

VIDEO IN

Your TV

Video cable

Copyright protection system
To play back the digital video images of a BD-video or DVD-video via an HDMI connection, it is necessary that both the
player and the display device (or an AV receiver / amplifier) support a copyright protection system called HDCP (high-
bandwidth digital content protection system). HDCP is copy protection technology that comprises data encryption
and authentication of the connected AV device. This unit supports HDCP. Please read the operating instructions of
your display device (or AV receiver / amplifier) for more information.

Note

• When connected to an HDCP incompatible display device, the picture will not be displayed properly.
• To output the audio signals from the HDMI OUT jack, set “Audio Output” to “HDMI Normal” or “HDMI LPCM” in the

setup menu. (refer to page 42.)

• The audio signals from the HDMI OUT jack (including the sampling frequency, the number of channels and bit

length) may be limited by the device that is connected.

• Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). While

connected to a device such as a projector, audio will not be output from the HDMI OUT jack.

• When this unit’s HDMI OUT jack is connected to a DVI-D compatible display device(s) (HDCP compatible) with an

HDMI-DVI converter cable, the signals are output in digital RGB.

INTRODUCTION

CONNECTIONS

PLAYBACK

FUNCTION SETU

P

O

TH
ERS

Advertising