Front panel, Rear panel, Front panel rear panel – Philips Magnavox MRD410B/F7 User Manual

Page 7: Introduction en

Advertising
background image

7

EN

INTRODUCTION

EN

(*) The unit can also be turned on by pressing these buttons.

1.

STANDBY/ON

Q button

• Press to turn on the unit, or to turn the unit into the

standby mode. (To completely turn off the unit, you
must unplug the AC power cord.)

• Press and hold for 10 seconds to shut down the unit.
• This button lights up in red when the unit is in

standby mode and turns off when the power is on.

2.

STANDBY/ON indicator

• This indicator lights up in red when the power is in

the standby mode.

3.

Disc tray

• Place a disc after opening the disc tray.

4.

OPEN/CLOSE A button*

• Press to open or close the disc tray.

5.

Infrared sensor window

• Receive signals from your remote control so that you

can control the unit from a distance.

6.

Display

• Refer to “Front Panel Display” on page 10.

7.

VOLUME K / L button

• Press to adjust the volume.

8.

STOP C button

• Press to stop playback.

9.

PLAY B button*

• Press to start or resume playback.

10. SOURCE button

• Press to switch the active source mode.

11. MP3 LINE-IN jack

• Use to connect your portable audio player with

3.5mm stereo audio cable.

12. SD CARD slot

• Insert an SD Memory Card and play back the

contents in it.

1. AC power cord

• Connect to a standard AC outlet to supply power to

this unit.

• Unplug this cord from the AC outlet to completely

turn off the unit.

2. 5.1ch Audio Out jacks (SPEAKERS (4

))

• Use to connect supplied 5.1ch speakers.

3. HDMI OUT jack

• Use to connect to a display with an HDMI compatible

port with an HDMI cable.

4. AUDIO IN (AUX) jacks

• Use to connect an other device with audio out jack

with an audio cable.

5. FM ANT 75

jack

• Use to connect the supplied FM wire antenna.

6. DIGITAL AUDIO IN (Coaxial) jack

• Use to connect an other device with a digital audio

coaxial output jack with a digital audio coaxial cable.

7. COMPONENT VIDEO OUT jacks

• Use to connect a TV monitor with component video

inputs with a component video cable.

8. VIDEO OUT jack

• Use to connect a TV monitor, an AV receiver /

amplifier or other device with a video cable.

Front Panel

OPEN/CLOSE

STANDBY/ON

STOP

VOLUME

PLAY

SOURCE

SD CARD

MP3 LINE-IN

1

4*

5

8

3

2

11

12

9* 10

7

6

Note

• This unit will be turned into the standby mode

automatically after 25 minutes of no action.

Rear Panel

SPEAKERS(4

Ω)

SUB-

WOOFER

FRONT

CENTER

REAR

FRONT

HDMI OUT

AUDIO IN

AUX

DIGITAL

AUDIO IN

COMPONENT VIDEO OUT

FM
ANT
75

Pr

Y

Pb

VIDEO OUT

2

3

4

6 7

5

1

8

Note

• Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent
damage to the unit.

• This unit does not have the RF modulator.

INTRODUCTION

CONNECTIONS

PLAYBACK

FUNCTION SETU

P

O

TH
ERS

Advertising