Philips Magnavox MRD410B/F7 - Manual (Page 34)

34 EN
PLAYBACK
You can change the active source mode to the desired
external audio inputs and enjoy audio from the connected
device with the multi-channel surround sound capabilities.
1 Press [SOURCE
؀ / ؁] .
• “Input Select” screen will appear.
2 Use [K / L] to select the desired source mode, then
press [OK].
“Disc / SD”:
Set the active source mode back to this unit.
“Aux”:
Set the active source mode to the AUDIO IN(AUX) jacks.
“Coaxial”:
Set the active source mode to the DIGITAL AUDIO IN
(Coaxial) jack.
“MP3 Line-in”:
Set the active source mode to the MP3 LINE-IN jack.
“FM”:
Set the active source mode to the FM ANT 75
Ω jack.
The sleep timer enables the unit to switch to the standby
mode automatically after the selected preset time.
To set the sleep timer :
Press [SLEEP] repeatedly to select the desired preset
time.
“SLP OFF”:
Turns off the sleep timer.
“SLP 15”:
Set the preset turn-off time to 15 minutes.
“SLP 30”:
Set the preset turn-off time to 30 minutes.
“SLP 60”:
Set the preset turn-off time to 60 minutes.
“SLP 90”:
Set the preset turn-off time to 90 minutes.
“SLP 120”:
Set the preset turn-off time to 120 minutes.
“SLP 150”:
Set the preset turn-off time to 150 minutes.
To check or change the setting :
Press [SLEEP] once to display the remaining time.
To change the setting, press [SLEEP] repeatedly until your
desired preset time is displayed.
To cancel sleep timer :
Press [SLEEP] repeatedly until “SLP OFF” is displayed.
Simply connect your portable media player (e.g. MP3
player) to this unit to enjoy superior sound quality from
your music collections.
1 Connect your portable media player to the MP3
LINE-IN jack on this unit.
• Refer to “Connecting Portable Media Player” on
page 16.
2 Turn on your portable media player.
3 Press [SOURCE
؀ / ؁] .
• “Input Select” screen will appear.
4 Use [K / L] to select “MP3 Line-in”, then press [OK].
5 Start play music on your portable media player.
Switching Active Source Mode
Note
• If you turn the unit into the standby mode, the active
source mode will be switched to “Disc / SD”.
• When selecting the source mode, it is necessary to
view the “Input Select” screen on the TV.
Sleep Timer
Note
• The sleep timer will be activated even if the unit is in
operation.
• Pressing [SLEEP] does not work while the setup
menu is displayed.
Play from Portable Media Player
Note
• Control playback is only possible on the portable
media player.
• Stop playback on the portable media player before
you switch to other source mode.