Pfaff Sewing Machine - Manual (Page 6)

4:6
18
A
A
D
B
C
E
19
Sewing mode
Speed control (18)
This function enables you to easily reduce the
maximum sewing speed. Just touch the speed
control icon to reduce the speed. To return to
normal speed, deselect the icon.
You can change the set speed limit. Long touch the
speed control icon to get a pop-up. Set the speed
limit you would like by sliding the button right
or left and then close the pop-up. The next time
you touch the speed control icon, the speed will be
reduced to the limit you have chosen.
You can sew without closing the pop-up.
Note: If selecting the highest speed in the slider, it is like
choosing no speed limit at all. The icon in the option bar
will then be deselected and the speed limit will be set to
default.
Sewing programs (19)
Sewing programs - overview
A Tapering
program
B Single stitch program
C Patchwork
program
D Preview fi eld
E Set number of stitch repetitions in single stitch
program
Note: Not all programs can be used at the same time.
You can sew without closing this pop-up.
Tapering program (A)
Tapering increases or decreases the width of the
stitch during sewing to create symmetrical or
asymmetrical tapers.
Activate tapering by selecting any of the tapering
icons (A). The default angle is 45 degrees. Long
touch the tapering icon to open a window with
different angle choices. Touch the angle you want
for your taper.
If tapering is deactivated and then activated again,
the angle will be set to the previously selected
angle.
When tapering is activated at both the beginning
and at the end and you start to sew, the stitch
width will start at 0mm. It becomes wider until the
selected stitch width is reached. Sew your desired
length and press the reverse button. The width
is reduced until the width is 0mm and the action
indicator on the machine will be lit until the taper
is fi nished.