Pfaff Sewing Machine - Manual (Page 9)

4:9
11
12
9 13 14 15
Stitch length + Stitch length -
22
Sewing mode
Stitch settings
Your machine will set the best settings for
each selected stitch. You can make your own
adjustments on the selected stitch.
The setting changes only affect the selected stitch.
Your changed settings will be reset to default when
selecting another stitch. The changed settings
are not automatically saved when turning your
machine off. You can save the adjusted stitch in
Personal menu.
Note: The set stitch width and the stitch length are
shown above the icons. When trying to exceed minimum
or maximum settings for width and length, a warning
sound will be heard.
The default value will be shown in black. Value changes
are shown in red.
Stitch width (11)
Increase or decrease the stitch width using + and -.
Stitch positioning (22)
For straight stitches the stitch positioning icon (22)
is shown instead of the stitch width icon. Use +
to move the needle to the right and - to move the
needle to the left. For straight stitches the machine
has 37 needle positions.
It is possible to change the needle position of all
stitches. Touch the width/position toggle (12)
icon to toggle between stitch width and stitch
positioning. The stitch position can only be
changed to the limit of the maximum stitch width.
Changing the stitch position will also limit the
stitch width adjustment.
Stitch length (13)
Increase or decrease the stitch length using + and
-. If lengthening a zigzag stitch or a decorative
stitch, the entire stitch will be longer. If lengthening
a satin stitch where the density can be adjusted,
the entire stitch will be longer but the density will
remain the same.