Philips WV-NW484S - Manual (Page 47)

47
Specifications
• General
• Camera
Power supply 24 V AC, 60 Hz, 12 V DC, PoE (IEEE802.3af-compliant)
Power consumption 24 V AC: approx. 8.2 W,
12 V DC: approx. 850 mA,
PoE: approx. 9.2 W (Class 0)
(When heater unit is used)
24 V AC: approx. 16 W,
12 V DC: approx. 920 mA,
PoE: approx. 12 W (Class 0)
Ambient operating tempera-
ture
-10ºC to +50ºC {14ºF to 122ºF}
(When heater unit is used)
-30ºC to +50ºC {-22ºF to 122ºF} (AC 24 V or PoE)
Ambient operating humidity Less than 90% (non-condensation)
Water Resistance Camera unit: IEC60529 (IP66, Against ingress of water
with harmful effects powerful jetting)
* Only on condition that installation specified in this
document and appropriate waterproofing is conducted
correctly
Monitor output VBS: 1.0 V [P-P]/75
Ω (NTSC), composite signal, RCA
jack
External I/O terminals ALARM IN, ALRM OUT or DAY/NIGHT IN, AUX OUT
Dimensions 159 mm (D) x 153 mm (H) {6-17/64"(D) x 6-1/32"(H)}
Weight Approx. 1.9 kg (including bracket) {4.2 lbs}
Finish Body: aluminum die cast, light silver
Dome: smoke polycarbonate resin
Pick-up device 1/3-inch interline transfer CCD
Effective Pixels 768 (H) x 494 (V)
Scanning Area 4.8 mm (H) x 3.6 mm (V)
Scanning 2:1 interlace
* Mounted with motion adaptive interlace/progressive
conversion function for network output
Minimum Illumination
(SENSE UP: OFF,
AGC: HIGH, F1.4, WIDE)
1.5 lux {fc} (color), 0.16 lux {fc} (black and white)
(When optional clear dome is used.)
0.6 lux {fc} (color), 0.08 lux {fc} (black and white)
Dynamic range 52 dB typ. (Super Dynamic
III ON, shutter speed OFF)
Gain ON (LOW), ON (MID), ON (HIGH), OFF